0.00 (0.00)

Ryan Young Ryan Young

0 Course • 0 Student

0.00 (0.00)

Biography

HPE7-A06認證考試 & HPE7-A06學習筆記

PDFExamDumps擁有一個由龐大的HP行業精英組成的團隊。他們都在HP行業中有很高的權威。他們利用專業的知識和經驗不斷地為準備參加HPE7-A06相關認證考試的人提供培訓材料。PDFExamDumps提供的考試練習題和答案準確率很高，可以100%保證你HPE7-A06考試一次性成功，而且還免費為你提供一年的更新服務。

PDFExamDumps的專家團隊針對HP HPE7-A06 認證考試研究出了最新的短期有效培訓方案，為參加HP HPE7-A06 認證考試的考生進行20個小時左右的培訓，他們就能快速掌握很多知識和鞏固自己原有的知識，還能輕鬆通過HP HPE7-A06 認證考試，比那些花大量的時間和精力準備考試的人輕鬆得多。

>> HPE7-A06認證考試 <<

HP HPE7-A06學習筆記 & HPE7-A06考試資訊

也許在其他的網站或書籍上，你也可以沒瞭解到相關的培訓資料。但是只要你把PDFExamDumps的產品和哪些資料做比較，你就會發現我們的產品覆蓋面更廣。你也可以在PDFExamDumps的網站上免費下載關於HP HPE7-A06 認證考試的部分考試練習題和答案來為試用，來檢測我們產品的品質。PDFExamDumps之所以能夠獨一無二地提供全面和高品質的資料的原因是我們擁有專業的專家團隊。他們不斷利用自己的IT知識和豐富的經驗來研究HP HPE7-A06 認證考試的往年的考題而推出了HP HPE7-A06 認證考試的考試練習題和答案。所以PDFExamDumps的HP HPE7-A06 認證考試的最新考試練習題和答案深受參加HP HPE7-A06 認證考試的考生的歡迎。

最新的 Aruba Certified Professional - Campus Access HPE7-A06 免費考試真題 (Q58-Q63):

問題 #58
Exhibit.

答案：B

解題說明：
The question involves configuring an OSPF virtual link to extend area 0 across a non-backbone area, based on an exhibit (not provided) and four configuration options (A to D). Since the exhibit is unavailable, I will assume a typical scenario where a virtual link is needed to connect two area 0 segments through a transit area (e.g., area 1).
* Analysis of Options (Assumed Context):A virtual link is configured using the area <transit-area> virtual-link <router-id> command in the OSPF process. The correct option likely includes:
* Option A:Incorrect syntax or incorrect router ID/area for the virtual link.
* Option B:Incorrect configuration, possibly missing the virtual link or using wrong parameters.
* Option C:Correct. Likely includes the proper command, e.g., area 1 virtual-link 2.2.2.2, where area 1 is the transit area and 2.2.2.2 is the router ID of the remote ABR.
* Option D:Incorrect, possibly configuring an unnecessary or incorrect virtual link.
* Why Option C is Correct:OSPF requires all areas to connect to the backbone area (area 0). If two area
0 segments are separated by a non-backbone area (e.g., area 1), a virtual link is configured between the Area Border Routers (ABRs) to logically extend area 0 through the transit area. The command area
<transit-area> virtual-link <remote-router-id> is used, specifying the transit area and the router ID of the remote ABR. Option C is assumed to provide the correct syntax and parameters based on standard OSPF virtual link configurations, ensuring area 0 connectivity and proper route advertisement.
* Relevance to Certification Objectives:
* Routing (16%):Designing and troubleshooting OSPF topologies, including virtual links.
* Troubleshooting (10%):Resolving OSPF area connectivity issues.
References:
HPE Aruba Networking AOS-CX Configuration Guide: OSPF Configuration, detailing virtual link setup.
HPE7-A06Study Guide: Covers OSPF advanced configurations like virtual links.
RFC 2328: OSPF Version 2, explaining virtual link functionality.

問題 #59
You haverecently configured a switch for 802.IX authentication with HPE Aruba Networking ClearPass. A security admin is seeing events withthe following description in ClearPass Event Viewer.
RADIUS authentication attempt from unknown NAD (10.10.1.10:1812)'
Which command should you us to identify theconfiguration issue?

A. show radius-server detail
B. show radius-server shared-secret
C. show ip source-interfaceradius
D. show aaa authentication-server radius

答案：C

解題說明：
The ClearPass Event Viewer message "RADIUS authentication attempt from unknown NAD (10.10.1.10:
1812)" indicates that ClearPass received a RADIUS request from the IP address 10.10.1.10, but this IP is not configured as a trusted Network Access Device (NAD) in ClearPass's network device list, or the shared secret doesn't match. The first step in troubleshooting on the switch side is to verify which source IP address the switch is actually using to send these RADIUS requests.
* RADIUS Source IP:AOS-CX switches can be configured to use a specific source IP address for RADIUS packets, often using the ip source-interface radius [vrf <vrf-name>] command. This is important if the switch has multiple IP interfaces or uses VRFs.
* Analysis of Commands:
* A. show ip source-interface radius: This command directly displays the configured source interface and IP address used for RADIUS communications, allowing comparison with the IP configured in ClearPass.
* B. show aaa authentication-server radius: Shows server group configuration, not the source IP used by the switch.
* C. show radius-server shared-secret: Not a standard command; secrets are usually masked in other commands.
* D. show radius-server detail: Shows configured RADIUS server details but doesn't explicitly show the source IP the switch is using to originate packets.
* Conclusion:To identify why ClearPass sees requests from an "unknown NAD" IP (10.10.1.10), the first step on the switch is to confirm which source IP it's using. show ip source-interface radius provides this crucial information.
References:AOS-CX Security Guide (RADIUS Client Configuration, ip source-interface), ClearPass Documentation (NAD Configuration). This relates to "Authentication/Authorization" (9%) and
"Troubleshooting" (10%) objectives.

問題 #60
A customer has configured eBGP peering using local AS 65000 with two routers from a CX 6300 VSF stack with thefollowing switch ports:
[ports connecting to router-1 10.10.10.2]

The LAGs are connected lo third-party L2 switches, which are used as a transit network for the remote eBGP routers. To optimise the possible BGP peering issues. The AOS-CX switch Is configured with theglobal settings:

What needs to be done on the AOS_CX switch to enable the bidirectional forwarding with the eBGP peers?

A. Option C
B. Option B
C. Option A
D. Option D

答案：B

解題說明：
The goal is to enable Bidirectional Forwarding Detection (BFD) for eBGP neighbors 10.10.10.2 and
10.10.20.2 on the AOS-CX VSF stack (AS 65000). Global BFD settings are already configured. We need the specific commands to link BFD state to the BGP neighbor relationship.
* BFD for BGP Configuration:Requires enabling the fall-over bfd parameter for the specific neighbor within the router bgp <asn> configuration hierarchy.
* Analyzing the Options (New Image):
* Option 1 (Top):
router bgp 65000
address-family ipv4 unicast
neighbor 10.10.10.2 fall-over bfd
neighbor 10.10.20.2 fall-over bfd
This enables BFD specifically within the ipv4 unicast address family context for both neighbors. This is a valid configuration location.
* Option 2 (Second):
router bgp 65000
neighbor 10.10.10.2 fall-over bfd
neighbor 10.10.20.2 fall-over bfd
This enables BFD directly under the main neighbor <ip> configuration lines within router bgp 65000. This typically applies BFD to all address families configured for that neighbor relationship (including IPv4 unicast). This is also a valid and common configuration location.
* Option 3 (Third):
int 1/1/1-1/1/2, 2/1/1-2/1/2
fall-over-bfd
Incorrect. Applies BFD configuration under an interface range context, which is not how BFD is linked to BGP sessions.
* Option 4 (Bottom):
interface lag1-2
fall-over bfd
Incorrect. Applies BFD configuration under an interface LAG range context, which is not how BFD is linked to BGP sessions.
* Comparing Valid Options (1 vs 2):Both Option 1 and Option 2 correctly use the fall-over bfd command under router bgp. Option 1 provides per-address-family granularity, while Option 2 applies it to the neighbor generally. Without a specific requirement to enable BFDonlyfor IPv4, applying it at the neighbor level (Option 2) is often simpler and sufficient. Both achieve the goal for the required IPv4 peering. In many documentation examples, the configuration is shown at the neighbor level unless per- AF control is explicitly needed.
* Conclusion:Both Option 1 and Option 2 show valid configuration methods. Option 2 is arguably slightly more common/general when BFD is desired for the overall neighbor relationship.
References:AOS-CX BFD Guide, AOS-CX BGP Guide (neighbor commands, fall-over bfd option). This relates to "Routing" (16%) and "Network Resiliency and virtualization" (8%) objectives.

問題 #61
Which setof commands willapply the device profile 'AP'to the device shown in the LLDP neighbor output below?

答案：B

解題說明：
The goal is to configure the switch to automatically apply a specific device profile (named AP-PROFILE in the options) to ports where an Aruba AP Model 635 connects, using LLDP information for detection.
* LLDP Information:The LLDP neighbor output shows:
* Neighbor Chassis-Description: ArubaOS (MODEL: 635), Version Aruba AP
* Neighbor Chassis-Name: AP-42
* Device Profile Mechanism:This involves creating an LLDP group that matches specific attributes of the desired device, creating a device profile containing the desired port configurations (VLAN, PoE, QoS, Role, etc.), associating the profile with the LLDP group, and enabling the feature globally.
* Analyzing Configuration Options:All options configure an LLDP group AP-LLDP-GROUP and a device profile AP-PROFILE. The key is the matching condition within the LLDP group and the completeness of the profile configuration.
* Matching Condition:
* Options A, C, D use seq 10 match sys-desc 635. This condition checks if the LLDP System Description contains the string "635". Based on the output (...MODEL: 635...), this conditionwill matchthe target AP.
* Option B uses seq 10 match sys-name 635. This checks if the LLDP System Name contains
"635". The output shows Neighbor Chassis-Name: AP-42. This conditionwill not match.

問題 #62
Identify the required configuration steps to enable DHCP EndpointProfiling with HPE Aruba Networking ClearPass. (Not all will be used)

答案：

解題說明：

Explanation:

To enable DHCP Endpoint Profiling, the switch needs to forward relevant DHCP packets from the client to the ClearPass server. The most common method is configuring the switch to act as a DHCP relay agent for the ClearPass server IP address on the client VLAN's Switched Virtual Interface (SVI).
In scenarios where port access control (like 802.1X or MAC Auth) is enabled, clients might need to send DHCP requestsbeforethey are fully authenticated. To allow this while maintaining security, a pre- authentication role with limited access (specifically allowing DHCP) can be applied to the port initially.
The logical sequence based on the provided steps, assuming a pre-authentication workflow is intended, is:
* Create the role:Define the pre-authentication role container and associate it with the appropriate initial VLAN if needed.
* Permit DHCP in the role:Apply an Access Control List (ACL) or policy to this role that permits the necessary DHCP traffic (UDP ports 67 and 68). The step provided only mentions UDP 67, which allows the client's initial Discover/Request packets towards the server/relay. (A complete solution requires allowing return traffic on UDP 68 as well).
* Apply the role:Configure the client-facing physical interface to use this pre-authentication role before the final role is assigned post-authentication.
* Configure DHCP Relay:Configure the ip helper-address <clearpass_ip> command on the client's VLAN SVI. This instructs the switch to forward the DHCP packets it receives from clients in that VLAN to the ClearPass server (in addition to forwarding them to the actual DHCP server). ClearPass receives these packets and extracts information for profiling.
This sequence ensures that even before full authentication, DHCP is permitted, and the necessary packets are relayed to ClearPass for profiling.
References:AOS-CX Security Guide (Port Access, Roles, AAA), AOS-CX IP Helper / DHCP Relay Guide, ClearPass Deployment Guides (Endpoint Profiling using DHCP). This relates to "Authentication
/Authorization" (9%), "Security" (10%), and "Switching" (19%).

問題 #63
......

有了PDFExamDumps的HPE7-A06考古題，即使你只用很短的時間來準備考試，你也可以順利通過考試。因為PDFExamDumps的考古題包含了在實際考試中可能出現的所有問題，所以你只需要記住HPE7-A06考古題裏面出現的問題和答案，你就可以輕鬆通過考試。這是通過考試最快的捷徑了。如果你工作很忙實在沒有時間準備考試，但是又想取得HPE7-A06的認證資格，那麼，你絕對不能錯過PDFExamDumps的HPE7-A06考古題。因為這是你通過考試的最好的，也是唯一的方法。

HPE7-A06學習筆記: https://www.pdfexamdumps.com/HPE7-A06_valid-braindumps.html

NewDumps不僅可以幫助你通過 HPE7-A06 認證考試，還可以幫助你學習最新的知識，HP的HPE7-A06考試雖然很艱難，但我們考生要用最放鬆的心態來面對一切艱難，因為PDFExamDumps HP的HPE7-A06考試培訓資料會幫助我們順利通過考試，有了它我們就不會害怕，不會迷茫，如果您對HPE7-A06問題集中的考題做到了全面的掌握，那麼您將100%以高分通過HPE7-A06考試，我們提供給您最高品質的HP HPE7-A06題庫問題及答案，覆蓋面廣，可以幫助考生進行有效的考前學習，當您在通過了HPE7-A06考試，您可以為HPE Campus Access Switching Expert Written Exam微軟技術考試做準備，如果你想參加這個考試，那麼PDFExamDumps的HPE7-A06考古題可以幫助你輕鬆通過考試。

老僧道：師弟請說，我知道妳們聽得懂也會說華語，現在我有問題要問妳，NewDumps不僅可以幫助你通過 HPE7-A06 認證考試，還可以幫助你學習最新的知識，HP的HPE7-A06考試雖然很艱難，但我們考生要用最放鬆的心態來面對一切艱難，因為PDFExamDumps HP的HPE7-A06考試培訓資料會幫助我們順利通過考試，有了它我們就不會害怕，不會迷茫。

精品HPE7-A06認證考試，高質量的學習資料幫助妳輕松通過HPE7-A06考試

如果您對HPE7-A06問題集中的考題做到了全面的掌握，那麼您將100%以高分通過HPE7-A06考試，我們提供給您最高品質的HP HPE7-A06題庫問題及答案，覆蓋面廣，可以幫助考生進行有效的考前學習，當您在通過了HPE7-A06考試，您可以為HPE Campus Access Switching Expert Written Exam微軟技術考試做準備。

Courses

No course yet.

Ryan Young Ryan Young

Biography

HPE7-A06認證考試 & HPE7-A06學習筆記

HP HPE7-A06學習筆記 & HPE7-A06考試資訊

最新的 Aruba Certified Professional - Campus Access HPE7-A06 免費考試真題 (Q58-Q63):

精品HPE7-A06認證考試，高質量的學習資料幫助妳輕松通過HPE7-A06考試

Courses

Support